Sony BRAVIA KDL-V32XBR1 32 in. LCD HDTV "table top stand screws" Questions

top table. http://www.docs.sony.com/release/SUWL31_EN_ES_FR.pdf This is a link to all the downloadable manuals and what not.Well hope this will help,and good luck. This TV is very top heavy, the stand

...table top, on the left corner is 1.75" from the table top. That is enough to be seen by someone watching TV and it is tilted lower on the right side. Or is the stand just bent? check the screw ...

table stand off the bottom of my tv! manage to get the plate off but there is still a part sticking out of the bottom of the tv...i'm trying to wall mount it. There's four screws that hold it in place

...table top stand in a move - can you tell me where I can get the 3 screws needed - thanks I am guessing the screw size is M6/16mm , based on Sony official page for your TV: ...

...table top mount?? Most the time they come with a plastic insert. If you put this in you must remove it and you will see the table top insert holes. Set the stand on something flat and have someone ...

...table to prevent scratching the screen. Lay the set face down on the blanket and there will be usually 4 screws in the middle at the bottom facing up as the set is flat on the blanket that is holding ...

...at Home Depot or Lowes (specifics on part numbers)? Thank you! you Could just pick some up at Home Depot or Lowes The screws used for for attaching the table top stands are called M6 SCREWS IN ...

...table. Remove the stands legs( 2 screws each) then 4 large screws the legs attach to. Or remove the wall mount brackets. 2 small black screws middle of the cover (above the component interface ...

...table top stand take. Lost mine Hi, The size of the screws used for attaching the TV is M6. You can either use M6X12 or M6X16 screws for attaching the TV. You can purchase the cable from any local ...

magnavox 42mf-438B/f7 lost table top base screws need replacement The table top stand screw are missing and I need new screws for the stand. Locate nearest store