Arris Touchstone Telephony Cable Modem Tm602g/115 "router address" Questions

address on Router to 2 as example 192.168.0.2. (it has to match in that modem device would have been 192,168.0.1) (if it was 10.0.0.1 make wi fi 10.0.0.2 make sure subnet mask is the same like 255.255

...router and type in this address, it will most likely come up. If it does change it's static address to 192.168.1.12 (actually any number behind the last period above 1 and under 255.). Also set its ...

...router address is wrong or you are not connected to the network.. Guessing you are using Windows XP or Vista. Go to the DOS prompt (http://www.computerhope.com/issues/chdos.htm) then type ipconfig. ...

...router address is 192.168.1.1 and Subnet mask of 255.255.255.0 and it's DHCP server controls address 192.168.1.100 for 50 leases to 192.168.1.149 then consider using the range 192.168.1.2 - ...

...the MAC address of computer, that is why you may need to clone that address into router, so the router can appear as the machine to the modem, than the router assigns net address to computer. ...

address of the router is the same as the address of the Actiontec modem. When entering the http://192.168.01 address, I keep getting the modem settings page -- how do I access the router settings page

...address for your wireless router ( the DEFAULT GATEWAY. This information should be contained in your router's manual. If you cannot find it, enter "198.168.1.1" as the address. This is usually the ...

...router by WEP KEY or MAC address. This set up in the "security tab" in the router. using 192.168.0.1 or 192.168.1.1 to access through a browser. 6.Note router name you are connecting to. 7. Move the ...

...use 192.168.0.1. Some US Robotics routers use 192.168.123.254, and some SMC routers use 192.168.2.1. No matter the brand of router, its default internal IP address should be provided in

...address the router would not be able to connect until noon the following day when it tried to refresh. Rebooting the router should cause it to sync back up with the modem and pull the correct IP ...