Question about Konica Minolta bizhub Office Equipment & Supplies
...error:- c0206 Hi, C-0206 relates to tray 3. With the copier turned on do the following Open paper tray 3, remove paper, close tray, open then shut front door, load paper into tray 3 - hey presto!! If ...
error appeared. There is no misfeed that we can find and we cannot cancel the job or reset the copier. tried many way, even powering off machine. Thewre could be even a small piece of paper stuck. Try
Question about Konica Minolta bizhub Office Equipment & Supplies
stuck on warming up. the screen will not allow any touches The black Image unit might of failed. Was there a error code like C0211? There also could be loose connections on the PWB-M which is a ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...error of the EEPROM. The only thing you can really do is turn the main power swich (the big one under the flap) off and leave it for about 10 seconds. Then turn back on and cross your fingers. I'd ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...stuck down on the right side in slot 3 I think it is. Please advise if you have any idea.Many thanks f28-3 is a hv error, replace the transfer/seperation unit and the hv casings/ sleeves on the ...
...error code c3451 brian, I followed your your instructions in your previous post. I turn off the main power from behind the unit, hold the utility/counter button and it's supposed to give me the ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...stuck in that state no matter what. Remove the clock battery didn't help. Any suggestion? TIA I THINK IT IS MEMORY UPGRADE, ALSO MAYBE A PARITY ERROR, SOME MEMORY DO NOT NEED PARITY ON THE CHIP SET, ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...stuck behind the tray. If so remove it then do a trouble resset and see if it fixes your problems. Most of the time I have seen that error is been when they have filled the paper tray with to much ...
...error message on our Bizhub C300 color copier. It is C-5102. What is the problem? C5102 means that your main drive motor is not turning when it should. This could be as simple as a loose power ...
...TRAY 4 ELEVATE ERROR - ITS MORE THAN LIKELY THERE IS PAPER STUCK BEHIND THE TRAY, REMOVE THE TRAY AND REMOVE ANY PAPER IN THE BACK OF THE MACHINE AND THEN RE INSTALL THE TRAY THEN REBOOT THE ...
1,254 questions posted
Usually answered in minutes!
924 Questions
417 Questions
261 Questions
256 Questions
111 Questions
