LG 65 Pint Dehumidifier Auto Shut-off External Drain - LD651EBL "keep switching" Questions

My Fedders dehumidifier keeps reading full all the time My Fedders dehumidifier Model M3DH30B2A keeps reading full all the time. Switch is working when held in manually, the float in the tray seems ...

my ebac6000series keeps on turning off and will only start if you tip it forward bucket may need a shim to keep it in contact with bucket full switch (switch thinks bucket has been removed)

the unit is several years old - the float keeps falling in and the unit shows full -can I get a new float and will that fix the problem? If the float falling in tells you its full probably not. Unless

...if it's stuck by pulling it in and out a few times .try spraying with wd40 or even pam will work to keep keep it from sticking again.if this is not the issue it could be a bad switch or something ...

my dehumidifier is only about a year old and the bucket full light keeps blinking. i turn it on, it sounds like its going to kick on but shuts off a second later. It sounds like the switch under the ...

My the bucket on my M7DH45B2-A fills and the units keeps running allowing water to spill from the bucket on the floor. It seems that the sensor switch is bad. Is there a replacement switch and is ...

...may wear out faster with this constant switching. We keep the humidity set at 50-55%. Thanks for any help you can offer. Check this page: ...

...it will start running but the contact from the bucket when I put it in doesn't reach far enough to keep the switch engaged. I will use a hose in the future if I can just get it to run once!! It ...

my zenith zd309 light keeps blinking but the water my zenith zd309 dehumidifier light keeps blinking but the water tank is empty and the filter is clean. The motor will start for about a second and ...

was full - turned off to empty - replaced empty bucket, won'r turn back on and keeps beeping full Try reinserting the bucket, making sure that it's positioned properly. So that the safety ...