2010 Honda Odyssey EX-L "front brakes fully releasing" Questions

brakes checked on all 4 wheels to ensure there is no binding of the brake pads on brake rotors(discs) when the brake pedal is released. If , for example, the front brake pads on one side are not fully

...brakes have locked on. Front or rear? Rear disc brakes too? This could be master cylinder not fully releasing. Is pedal fully coming back to the stop? It needs to so it uncovers the ports to let the ...

...front cable threaded rod. Raise and support the vehicle. Remove the rear tire and wheel assemblies. Adjust the rear drum brakes. Ensure there is no brake shoe drag after adjustment by rotating the ...

front brakes lock up for no reason Under the front slam pannel, that's where the wipers are, are two long bars with control arms on either end. Grease these as fully as you can, start the engine, pump

front brakes wont fully release There's air in the hydraulic system - bleed the brakelines to get rid of any air in the system. When braking air get compressed to a tiny pocket, when releasing it ...

...front brakes then dragged to the point of seizing and overheating. Dealer then checked system including piston caliper and now claims a master cylinder proportioning valve for the right side (!?) is ...

...hill next time.(back in, apply E brake .) Emergency brakes usually hold better/well when vehicle front heading down hill. If it doesn't hold with front pointing down, then rear brakes need

...front brakes now while driving it feels like brakes were applied by themselfs Sounds like the calipers are not fully disengaging. Re-inspect the brakes, make sure everything is clean, then check to ...

...brakes on Mazda B4000 every 8 months. Brake dust is covering front wheels all the time. Also front tires squeeling when pressing on gas while dring. Any ideas would be appreciated. The calipers are ...

BRAKES ON THIS WEEKEND... DRIVER BRAKE GETS HOT...SO HOT YOU CAN'T TOUCH IT....PROBLEM AT TIMES WHEN RUNNING FOR AWHILE IT ACTS LIKE IT IS RUNNING OUT OF GAS.IF YOU LET IT SIT FOR AWHILE IT STARTS AND