Sony FD Trinitron WEGA KV-24FS100 24" TV "ic 600" Questions

...light by the standby/timer button blinks four times and won't turn on you have a drive ic problem. ic 600, r640 and modification needs to be performed. Take to a Sony servicer. Est.$150 parts and ...

...is on. If it is so the power supply is faulty. You should check DC supply voltage in pin 6 of SMPS IC TDA4605.. If no voltage in this pin, check the limiting resistor connected in series. If these ...

...IC's. He said i had 10 and he quoted me a repair of around $600.00. are there kits for DIY? Please help 10 is questionable? However, 450 to 600 bills is common. You cannot do this yourself unless you ...

...IC in order that will works better again.STK 392-xxx ICs and it's associated resistor,this resistor automatically change value,can caused truoble even though you change the ICs.If you bring this to a ...

...600 dollars to repair. Not sure I want to pay that much-might just want a new, non-tube, TV. Anyone else fix this problem, and how much did you pay?? Thanks! Six blinks - No Horizontal (H STOP), no ...

TV PROBLEM HI, NICE SITE. I OWN A GRUNGIG FLATSCREEN WIDESCREEN TV, PURCHASED FROM CURRYS A FEW YEARS AGO. ITS BEEN FINE UNITL LAST WEEK. THE PICTURE HAS STARTED TO GET BIGGER AND BIGGER. I NOW CAN'T ...

...ic have failed. The repair may cost somwhere around 150.00 to 200.00 to fix from a technician. If you want the specifics, i can provide them. I have same problem and just got a $950 quote from the ...

...IC or other parts have failed, but the soldering is so common it would be the best place to start. I've been out of the everyday shop end of TV service for 10 years now, so I don't know what kind of ...

...to get into a menu that allowed us to reset the digital channels and turn on the digital receiver which when we went into that menu for some reason had been turned off. Got it working again then it ...

600. Once you take the tube out you will see where it leaked. The problem is that the frame on the CRT that the heavy screws with springs are mounted on (that hold the lens coupled to the CRT) is weak