Sony FD Trinitron WEGA KV-24FS120 24" TV "tv remote change channels fix" Questions

...tv and now the remote will only change the channels up and will NOT change channels down. How can I fix it? Thanks. Could be a bad remote controller(well button inside the remote:) ) . Try front ...

...remote for the RCA tv I'm using. I only have the Verizon FiOs remote. Someone hit the channel button on the tv and now I can't turn it on without it being snowy. The tv is normally set on channel 00. ...

...tv (the remote didn't change channels only volume ). i have direct tv and i have been using there RC16 model remote for a while now. It works but i cant change the volume and now my old AOC remote ...

...tv. i bought a universal remote and it still didnt help. Your in the video mode so you have to change the input. On the original remote, its the button left of the power button. A universal may not ...

...the front cover of the tv where you think the remote control reciever may be , if this fixes it then it means something is amiss with a rogue remote , most likely batterys..could even be sunlight

...remote control, press POWER on the TV. The TV will turn itself off, then back on, the original settings wiill be restored... definition: ch. fix- 2-6: Select when you want to control all channel ...

...remote. The tv will turn on and work with the buttons on the front but won't go higher than channel 13. Neither remote can work the tv. We need to get to channel 60 for our DISH programs. Any ...

remote control, and the TV screen would show a symbol of a small rectangular box with curved corners with an arrow going into the rectangle on the left of it. This symbol was to the left of the number

...simply by pairing digi remote with tv and while in tv mode on remote, hit the input button. That should change tv back to cable/antenna setting so that you may access channel 3. Hope this was

...remote and programmed it to the TV but it still will not change the channel and when I push input on the remote it changes to channel 3. How can I fix this? Try by pressing "0, 0" by remote control. ...