E-Machines Bestec ATX-300-12E Rev. D 300w E-Machine GTW Power Supply Part 100929 (ATX30012E) Power Supply "plug pinout" Questions

...pinout for Dell AA23300 Power Supply? I am considering using this as a stand alone power supply, but get no voltage out. I suspect that I need to jumper one or more of the sense pins to get it to ...

Pinout for dell power supply with model number Ep071298 Hi: I bought this Dell server atx power supply from a surplus store but am unable to figure out how to make it work without a PC. All it has is ...

...plug is the five volt pin the purple wire also carries 4.25 volts the purple wire. heres the atx pinout http://pinouts.ru/Power/atxpower_pinout.shtml heres something for you to read higly recommend ...

where to plug case side fan no schematic. Okia psu. On the 4pin plugs what are color volts? Pinout Pin number Wire color Description 1 yellow +12 volts 2 black ground 3 black ground 4 red +5 volts

...two wire colours or the wiring codes to use to trip the power box into manually operating with out plugging it back into the computer as its going to be use as another power source? This is for a

...ATX. Since am using this Pwr sup as an external stand alone how can I get it to turn on without plugging it in to a motherBoard for turn on feedback??? here is a link with a pinout and

...plug then chances are that it's good unless the cable is perished or chewed up.Check power supply. Easiest way is by shorting the power_on pin to ground. Go to http://pinouts.ru/pin_Power.shtml ...

...plug. The colors of the wires tell a story. Red is +5V Black is Ground or Return. There is Yellow and Orange and Blue and green and gray. There are SATA connections . Look in your users manual of a ...

...highly appreciated The fact that it is a dell IS relevant because dell is always doing custom plugs and connectors and form factors. It has no ATX plug. This a server power supply and has no ...

plug & pinout) and the Iomega Drive is now working fine ;) I have a similar problem to dmingo but when I plug in my drive (HDD2H) it imediately powers on but I can't switch it off or access the disks.