InFocus ScreenPlay 7200 Multimedia Projector "start flicker shut down" Questions

...start to flicker, change colors, lose resolution and then shuts down. The original bulb had 2000 hours. We changed out the bulb thinking this was the problem. It is still doing the same thing. I have ...

...shuts down Mine does the exact same thing, but usually before it overheats and shuts off. This started after I replaced the lamp the third time. I haven't found an outside solution to this, but ...

start up when i power it on, or it shut down after a few seconds. It seems to be a loose wire somewhere, but i just give it a punch and then it starts.. Put the projector on a power regulator see more

I have optima projector and started flickering, green and other colors and after about 10 min. I hear a noise and the system shuts down. I seen by removing the dust it will stop flickering and once I ...

...flicker all over the screen. It usually starts a few minutes after it is turned on. sometimes it stops after an hour or so but, it starts up, again. It also does it with a dvd player input in use. ...

...shut off and cooled down it can be restarted and 1-3 repete lamp is 2000 lumin purchased for school 9/27/05 less than 500 hrs of use This is caused by the color wheel sensor failure. The sensor is ...

start-up but then gets too hot and the wheel skips and creates the flicker). Luckily, I have a very extended warranty and was fortunate enough to send it in and have the dust removed & color wheel

...down. I can pull the power cord and when I plug it back in, it will start up again but repeates the shutdown. The lamp has just under 400 hours on it. When it was new, the power supply failed and was ...

...start up, but the lamp doesn't light. It cycles a few times and the shuts down with a bulb failure indicator light illuminating. I thought it could be a bad bulb, so I got another and the ...