Kenmore 22422 Top Load Washer "model 110 timer" Questions

Ad

Question about Washing Machines

1 Answer

...110 washer. The holes on either side of the threaded knob post don't appear to be threaded, and the screws from the old timer don't fit. The new timer came with two screws with allen heads. How do I ...

Ad

...Model 110, Serial No. 27602690 won't spin Kenmore washer Model 110, Serial No. 27602690 won't spin If wash cycle operates and water drains as should before spin indicates motor spinning. ...

Ad

Question about Kenmore Washing Machines

1 Answer

...model number 110 10 amp 60 hertz 120 volts the machine gets power and runs but the big control knob that controls the diffrent cycles is running only about 20 seconds and than shuts off than you wait ...

...model 110 washer will not drain at end of wash cycle Kenmore top load washer model 110 fails to start the spin cycle after ending the wash cycle It could be the lid switch or the timer. Thank you, It ...

Question about Kenmore Washing Machines

1 Answer

are 110. If you put your model number into the following site for Sears. You'll see a list of sub-components. On the section for the Console, you should see the part and part number for the timer knob

...model no. you give in incomplete. If it has a small "110." in front of the number you posted, You probably only need a lid switch. The timer thinks the lid is still open and as a safety will not ...

Question about Kenmore Washing Machines

1 Answer

Model 110 stops with water in machine. Move dial to rinsing cycle. Runs some then stops with water in machine. HI. The timer module will be the culprit here. The timer motor is malfunctioning. This ...

Question about Kenmore Washing Machines

1 Answer

...110 model 110. 92581210. It fills the tub but when it clicks to spin out you can only hear the timer working. What is the problem and part # i will need. Love my washer, just want to fix it. you will ...

Question about Kenmore Washing Machines

1 Answer

Model 110 2600 2011 kenmore washer won't spin try turning the knob just a bit at a time and see if you can get the spin cycle to start. if you get it to start spinning it means the timer has failed. ...

Question about GE Washing Machines

2 Answers

...Model 110 Washer with a loose timer knob. The timer itself works fine and when turned with needle nose pliers will run the washer as normal. However, the knob, that you have to push in to turn and ...

Not finding what you are looking for?
Kenmore 22422 Top Load Washer Logo

1,909 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...