Brother LS-2125 Mechanical Sewing Machine "bobbin click place" Questions

Ad

bobbin case click into place? This is very simple but might be the answer you need. I had the same problem and none of the suggestions I could find online helped. My bobbin case would click into place

Ad

Question about Necchi Sewing Machines

1 Answer

...bobbin in place as you inset the bobbin case into the shuttle. If the bobbin case for this machine as a "finger", this has to align with the opening in the shuttle. If you cannot readily see this - ...

Ad

...I'd guess the bobbin case is not firmly in place with the locking tabs. I believe the click is the needle striking the out of place bobbin. Your Owner's manual may give you some better

Question about Singer Sewing Machines

1 Answer

bobbin pulls out of place ill be sewing and the bobbin will "lift" out of place.....the area where its supposed to stay shifts and wiggles out of its place. i have to stop and snap it back down. when ...

...Place the bobbin flat on the table with the thread winding clockwise (comes off the top of the bobbin and points right). Place the bobbin-case with the hole pointing up, insert the bobbin without ...

bobbin over to engage the winding mechanism, do you hear it click into place, or maybe feel it click into place ? I am wondering if perhaps it's not quite engaged and that's why it won't wind. How old

Question about Singer Sewing Machines

1 Answer

...bobbin in place. Insert the bobbin case into the race/shuttle, still holding the lever out. Align the finger on the bobbin case with the opening in the race/shuttle. You may have to turn the bobbin ...

Question about Singer Sewing Machines

1 Answer

will position the shuttle to accept the bobbin case. If the bobbin case has a lever on the back, lift it and hold it open as you place the bobbin case back into the shuttle. It should click into place

Question about Bernina Sewing Machines

1 Answer

...and under the guide just above the opening. Raise the needle to it's highest position. Left the lever on the bobbin case and hold it open as you insert it into the shuttle. It will "click" in

Question about Singer Sewing Machines

2 Answers

bobbin easier & straighter then you can put it in place let go of the lever & give a light push till you feel it click into place, I hope this helps.... I can assist you further if you require further

Not finding what you are looking for?
Brother LS-2125 Mechanical Sewing Machine Logo

915 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Paul Bade

Level 3 Expert

1818 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...