Question about Sewing Machines
bobbin. If you need to tighten the spring on the bobbin then do it in tiny increments and remember where you started. Try taking out the bobbin and gently pulling by hand the thread from it; it should
...tighten the bobbin slightly. Now, tighten the top stitches the same amount of pressure as the bobbin. The attempt is to have both the bottom and top stitches exactly the same so the final stitch ends ...
tighten the bobbin tension on this machine? On the bobbin case there are two screws, make sure the bobbin turns anti clockwise inb the bobbin case as you look at it, turn the larger screw clockwise to
...tighten the setting until you have resistance when you pull the thread to thread the needle Check that the bobbin is inserted turning the proper direction in the bobbin case and that the thread is ...
Question about Sewing Machines
...tighten the upper tension disk. Keep tightening, a little at a time, and retesting. The ideal tension setting is when both the upper thread and bobbin thread meet in the middle of the ...
Question about Sewing Machines
...tighten the bobbin tension. There is usually a small screw that controls the bobbin tensioner that can be tightened slightly to adjust bobbin thread tension. Do this little bit at a time and test ...
Tighten bobbin tension ======================================or loosen top tension. 2.forming loops on bottom of cloth====Tighten top tension 3.Bobbin placed in case incorrectly===remove and replace 4
Question about Singer Sewing Machines
...TIGHTEN THE BOBBIN TENSION ON A SINGER 717 HOW DO YOU TIGHTEN THE BOBBIN TENSION ON A SINGER717 When you stitch the top thread is straight, and the bottom stitch has a nice defined stitch. There is a ...
Question about Sewing Machines
because it may cause the fabric to pucker between stitches. If you don't want the bobbin thread to show at all on the top, loosen the top tension, and if necessary, slightly tighten the bobbin tension
Question about Kenmore Sewing Machines
is usually a lever wheel etc on the machine (depending on model). To tighten the bobbin tension you need to tighten the small screw on your bobbin casing. I don't suppose it could be as simple as this
214 questions posted
Usually answered in minutes!
64 Questions
435 Questions
165 Questions
144 Questions