Bernina Activa 130 "put thread bobbin old" Questions

...bobbin thread puts out On my old Singer Stylist 834 sewing machine, the bobbin thread puts out more thread than required and consequently gets to be a tangled mess on the underside of the cloth. This ...

thread ran out. Put in one prewound bobbin that came with it, even though the bobbin appeared different. The bobbin thread didn't feed and the machine jammed up. I finally wound the old bobbin and put

put thread front to back in eye needle. 4. Set machine on straight stitch sewing. Attach straight stitch foot if necessary. 5. Make sure 5-6 inches of thread are pulled toward you from threaded needle

...thread from the machine. Put in a brand new needle.. ALWAYS RAISE the presser foot and rethread the top thread from the beginning. (AVOID old or bargain bin thread--might even try a different type of ...

...put the cotton reel on the top pin, take the thread to the left and round the little wheel and back to the bobbin that should be on the winder, wind the thread round a few times to take a grip, ...

...thread a bobbin and put it back in, it won't sew right and the bobbin thread bunches up and the needle sometimes breaks. This has never happened to me with any other machine. It won't pick up the ...

put thread in the bobbins anymore how can I fix that? have good eye hand cordination and lick the end of a perfectly cut thread up to the bob make sure not too have any loose thread on the end or will

thread around a certain way? I know I put the bobbin on the spindle on the top and click it over to the right, but thread keeps getting wrapped around the spindle holding my spool of thread just under

...thread is taut, but makes no difference if I put tension dial on lowest setting. Hm, if the bobbin thread stitch is inconsistent, I would guess it is a problem with the bobbin tension. You might try ...

proper threading. Also, thread quality is important. If it's old, throw it out. A good way to preserve your thread is to put it in the freezer in a ziplock bag. Maybe one of these suggestions may help