...metal ring into place. The bobbin or bobbin case now can be put back in. Hint on metal ring placement: they almost always have a notch that goes at the very top where the arm on the bobbin case sits ...
Question about Singer Sewing Machines
...4552? Singer sewing machine model 4552 Can metal bobbins be used in place of transparent plastic bobbins? See the user manual for recommendation. SINGER 4552 LIST OF PARTS Pdf Download ' ...
Question about Singer Sewing Machines
...bobbin no longer winds. I took it for an estimate and was told that the winder had seized and they were unable to fix it. Can I do anything on my own? starlet 496 Try Kroil; put in the places where ...
...metal piece is secured by the two black swing arms and the bobbin can then be easily replaced as usual. It helps to tilt the machine back slightly when inserting these pieces but be careful not to ...
...then need to take the tread and wind around a metal latch at the bottom the bobbin case then back onto the plastic plate, then place the plastic cover over it. This should then work. Hope this ...
bobbin over the metal pin nad push firmly down. It is located on the top on the right hand side. 10. Place thread on the spool pin as before and thread the cotton through the plastic thread guide. 11.
...metal bobbin I was using with a plastic one, that was a little less rattley inside the bobbin case, replaced the needle with a new, universal one, and changed out the thread with something a little ...
should it be turned... The plastic bobbin case should sit on top of the raceway, it should slot in quite easily, once the bobbin case is in put the small metal clip at the top over to hold it in place
Question about Singer Sewing Machines
metal bobbin case, the metal case has to be lined up and snapped firmly into place. You should hear it snap and lock into place. If it's a horizontal or top loading bobbin, and the plastic bobbin
72 questions posted
Usually answered in minutes!
111 Questions
91 Questions
75 Questions
44 Questions
29 Questions