bobbin holder won't stay put I have a husqvarna c 10 sewing machine and i was sewing and my needle broke, now the bobbin holder will not stay put and the thread gums up what do i need to do If the ...
gummed it up with the velcro glue. Your needle may be shot also, so insert a new one Try cleaning and lubricating very thoroughly. Use a q tip. I am hoping that it did not mess up the timing. there is
Question about PfaFF Sewing Machines
...has gummed up the needle. Raise the presser foot, loosen the needle, and see if you can remove the bobbin from the machine. Once you get the bobbin loose, then most everything else can be
I'm sewing metallic fabric and the needle keeps gumming up and then the thread breaks. Hi, What you need to get is a bottle of Sewers Aid . It is made by Prym. The best way to use it is, spread an ...
necchi sewing machine What causes the needle to keeps hitting the strike plate, thereby breaking. There are a number of things that could cause this. Needle installed with flat in the wrong direction.
Question about Elna Sewing Machines
...needle swing bearing is a bit gummed up so not swinging fully when the gear is directing it to, could be in need of a good clean and oil. Other option is to set it to a widest zig zag, left needle ...
...gummed up with old oil and lint. Methylated spirit on the needle arm and piton where it opught to move left & right to unclag...set in ZZ position and manually move needle arm to see where it all ...
...needle arm guiding left/right motion that is gummed with old oil and lint....you need to get at it with methylated(denatured) spirit and move needle arm with thumb & forefinger to "wiggle" the ...
Question about Great Plains Ind. Sewing Machines
...gummed up from a sticky backed Velcro. How can I clean the goo off if that is the case? that is a possibility and is a reason that I don't use self adhesive velcro any more I just put in a new needle ...
...be the that top tension is not tight enough. It could also be that you have used an adhesive on a fabric, and the needle has gummed up. Change your needle first, then try adjusting the top
72 questions posted
Usually answered in minutes!
111 Questions
91 Questions
75 Questions
44 Questions
29 Questions