Necchi 4575 Mechanical Sewing Machine "wont thread bobbin plate" Questions

...wont pick up the bobbin thread? You need to get into the user's manual on removing the bobbin shuttle that the bobbin holder clips into (actually pretty easy, I clean ours yearly especially if fuzzy ...

thread keeps getting tangled in bobbon and wont sew rethreaded try changing the needle rethread using EVERY thread guide make sure the thread has not come off the thread take up lever make sure the ...

...wont feed through when stiching on my janome - my excel 23l the bottom thread tangeled...i changed the needle and re threaded the bobbin...now the bobbin wont feed through...i also fiddled with the ...

...thread and insert the bobbin. You probably wont find the 530 manual however download a copy for Bernina 530-2 or 532-2 as they are almost identical to the 530. The bobbin thread does not thread the ...

...wont move and its not sewing If you haven't already check to see if the bobbin is right side up. On certain models that matters. You may have a thread jam or the thread is caught on something under ...

Wont move at all. Try turning the wheel to the right end manually----briskly back and forth to loosen thread that are caught in the bobbin. Remove bobbin and clear threads. If none, remove plate below

wont sew thread bunches up try to sew but thread bunches up the casing pops up Hi! I think you are threading the top of the machine incorrectly. Make sure that what I'm saying is correct, use two ...

...wont pick up bobbin thread START WITH: SHARP NEEDLE (NEW), GOOD THREAD (NOT FUZZY-LONG STRANDS), ADJUST TENSION OF BOBBIN AND TOP. 1. Check the bobbin area and make sure the hook(pointed thing) and ...

...wont feed Sounds like you have a thread jam( bird's nest) inside your bobbin housing. Take the face plate off, remove the bobbin, and take the housing apart if you have to...then start all over with ...

...wont feed threw bobbing gets tangeled keeps aying broken thread but it has not broken try  rethreading the machine top & bobbin--use different thread this timetry a new needleclean under ...