GE WJSR2070B Top Load Washer "center tub" Questions

Ad

Question about Maytag Washing Machines

1 Answer

...tub is off center with the lid opening, re center the tub and run spin again. If your tub returns to an off center stopped position you most likely will need the base kit replaced. The base kit ...

Ad

Question about Kenmore Washing Machines

1 Answer

...tub stays back and does not come back center by its self,,your counter balance spring broke,,no mattter which way you push that agitator it shoud come back to near center..what could be bad counter ...

Ad

Question about Kenmore Washing Machines

2 Answers

...center the tub on the frame and has some plastic bushings on the three corners. Tilt the machine back a bit, put something under the frame of the machine so it doesn't come down on you. If you know ...

Question about GE Washing Machines

1 Answer

...center tub seals to going bad I would recommend a qualified service technician come look at it to rule out which one it is if your centers tub seal is bad I would buy a new washer but sorry for the ...

Question about KitchenAid Washing Machines

1 Answer

tub goes off center. When it fills with water or rinses this causes the water flowing our to hit the top of the tub on the backside and water drains and leaks out the bottom of the washer. If you hold

Question about GE Washing Machines

1 Answer

...center of the tub out to better access the tub it self and clean it out. I got the bolt out that holds the center part of the tub in but can't remove the smaller part of the main tub. Does this come ...

Question about Kenmore Washing Machines

1 Answer

...tub is off center and filling with water it misses the tub. I can move the tub when it's empty alot more now compared to 6 months ago. Any help would be appreciated. Ron Open the top and observe the ...

Question about Kenmore Washing Machines

1 Answer

...tub is off center & is rocking around and leaks when filling. Sounds like you are missing a spring or two on the bottom of the machine. Lean the machine back so that you can look under it. There ...

...center agitator works fine, but tub is locked and will not spin. New Stator, New Hall Sensor, Losing patience fast here! WT5001CW lg washing machine, center agitator works fine, but tub is locked and ...

Question about Frigidaire Washing Machines

1 Answer

Can the wash tub be replaced? Where can I buy a new tub? yes the tub could be replaced here are the part numbers INNER TUB 131370400 OUTER TUB 131557201 it could be purchased at your local appliance ...

Not finding what you are looking for?
GE WJSR2070B Top Load Washer Logo

184 questions posted

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Virgil Watts

Level 2 Expert

267 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...