...close the lid then open it an inch and close it and open it if you don't hear a clicking sound the lid switch is bad.all the lid switch does is to stop the washer from running with the lid open ...
Question about Ariston Technologies Washing Machines
...lid opening to cause this switch to close. Other times it is on the hinge side of the lid and the protrusion is formed right into the metal of the lid itself to push a plunger on the hinge side to ...
Question about Whirlpool Washing Machines
...Bad lid lock activator....try taking some contact spray...and open lid find contact that goes up and down in lid closing area ...spay contact spray then open and close lid 5 times and try
lid is closed). If circuit is open when on, then break the contact cutting the wire. If switch is closed when on, then jump the two wires together. Do not operate the machine for a full cycle with lid
...lid a lttle and close it down a few times,if you don't hear a clicking sound when it closes you have a bad lid switch,or open the lid and stick a screw driver in the hole where the piece on the lid ...
...open Lid or other object has hit the timer knob and turned the washer off Lid not locked (by the way, not on all washers) and may be not draining. Make sure the lid is completely closed. Make sure ...
switch contacts should be closed. ? With the lid open, lid switch contacts should be open. ? If the lid switch has failed, replace it. ? If the lid switch is good, replace the electronic control board
...- Lid door open error Lid /door isnt fully closing or is open during wash cycle. Close lid. · Check wiring harness · Check lid switch · Check unbalance switch · Check circuit ...
Question about Washing Machines
...lid switch. it is the one closing when ever you close the lid of the unit. once the lid is close, the contact should be closed, if the lid is open, the contact is open also. tnx 4 using fixya, ...
401 questions posted
Usually answered in minutes!
992 Questions
874 Questions
371 Questions
398 Questions
255 Questions