GE WDSR2080D Top Load Washer "close lid closed" Questions

...lid is closed. The lid must be closed when the basket spins; some top-load models require that the washer lid be closed before the washer drive motor runs (thus no draining). If the lid switch isn't ...

lid close position isn't working or the tang that presses the switch isn't depressing the switch enough. Check to see if the lid is closing all the way, if so, then locate lid close switch and

lid is closed, make sure the desired cycle is still selected and then press the Start button and listen for the lid to lock. Make sure there are no loose metal objects such as coins and paper clips in

...close the lid then open it an inch and close it and open it if you don't hear a clicking sound the lid switch is bad.all the lid switch does is to stop the washer from running with the lid open ...

...close the lid, select program then start machine. The machine will begin to fill up with water and just before the cycle starts, the machine will stop and a message will appear with "lid won't lock, ...

...lid switch. it is the one closing when ever you close the lid of the unit. once the lid is close, the contact should be closed, if the lid is open, the contact is open also. tnx 4 using fixya, ...

...close the lid the strike wont go through the lid latch to close, am I doing something wrong or is the latch in lock mode after I replaced it ? It sounds like you are having trouble getting the lid on ...

...lid as closed. What can I do? You can bypass the switch by jambing something in there and this will allow it to spin with the lid open or closed but please keep the lid closed at all times while ...

...lid is closed), or closed when on (you get electricity when lid is closed). If circuit is open when on, then break the contact cutting the wire. If switch is closed when on, then jump the two wires ...