switch for a buffalo bench grinder model B-6CB 1/2 hp. 41/2 amp. serial #775713 I had the same problem with a Northern Tools bench grinder. These are made in China and parts are hard to come by. I had
...wire from the other tab under switch to one of the three tabs under plate that is marked hot or l1 is probably #2 but you need to be sure. the white is the nuetral or l2 which is most likely #3 and ...
...wire cord. Use the switch to break the neutral and ground the case. The connections should be as follows: Connection 1, would have one of the primaries and one of the starts to neutral. Connection 2, ...
Question about Craftsman Grinders
...switch for a craftsman 1/2 HP bench grinder model#397.19441. I have no owners manual or parts list. This grinder is several years old. this switch is no longer available from Sears, so I suggest ...
Question about Sears Grinders
...model 397.1949 1/2 hp bench grinder. Need a new capacitor and switch and wiring diagram. Replacement should be simple. Just do a one for one hookup with the new part, after you unplug it first. For a ...
Question about Black & Decker Grinders
Black & Decker 150mm bench grinder Model BG6150-xe. Only works intermittently. Would this be caused by worn brushes or loose/faulty wiring? Both and could also be the switch on the grinder
...switch. Mark each wire as you take it off. Take the switch with you to the store. First try a hardware store, then an auto parts store. If they don't have it try Sears. They will probably be able ...
Question about Craftsman Grinders
switch but i have no way of knowing how to test it or to hook it up. the windings coming off the motor consist of two larger wires and two smaller wires.the two larger wires are yellow and red and the
4 questions posted
Usually answered in minutes!
11 Questions
6 Questions
4 Questions