At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have a Sprite Super Sport 1992 model. My GVM disc says 770Kgs but empty weighs 960Kgs This is without
Tents, Tents Poles, Pegs and spare wheel and gas bottles. how do I get this fixed
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Loosen holding screws and unclip both arms
Flick the up/down lever then pull on black cord as you walk back away from RV
Slide both side arms up main arms, lock in place and then tension the awning and tighten lock screws
Release lock clips on main arms and slide them up [ halfway each side is probably best for your awning]
Support legs can be left attached to RV [safest] or can be separated and stand upright, using tent pegs into ground to secure or awning tie downs
You can take it to a truck scale to have it weighed. Your owners manual will give the trailer weight before you loaded it with camping equipment and kitchen ware. It weighs more than "off the showroom" floor weight....I'll bet. Good Luck....fill the holding tanks ...then go weigh, or look up capacity of your holding tanks and then multiply the gallon amounts X the weight of one gallon of water. Which is 8.35 pounds. And gasoline is 5.8 - 6.3 pounds. diesel = 7.15 pounds. Propane = about 4.11 pounds.
Do you have a tank heater on the tank? If not, you may want to get one to prevent the tank from freezing and busting. Next, there is a small diode inline and it may have failed which will give a false reading.
×