Speed sensor is located in front of engine oil dip stick on my o1 rk,in frt of starter motor,my speedo stoped working today, and the sensor has one 7/16 bolt head easy to get to with open end wrench.remove the bolt and slowly wiggle the sensor and lift up and pull out,my sensor was coverd with metel shavings,i wiped it clean with a clean rag,a magnet is also helpful to remove shavings from sensor but the rag worked fine,put the sensor back and bolt it back in,not to tight just good and snug.it fixed my problem.speedo works great again.
If you have put it back the same way you took it out, spin front wheel and have some one watch the speedo needle, if it moves then everything is alright, else take it apart again and ensure everything is in its place. Good?
5,147 views
Usually answered in minutes!
×