SOURCE: how to program the fob for my 2008 flhx street glide
Per the owners manual that came with my 2008 FLHX on page 119 it says the fob's can only be assigned to the motorcycle by a "trained Harley technician" (for a nominal fee of course). The next 6 or so pages show how to arm and disarm your security system using the ignition switch and turn signals when your fob is not present or broken. If you don't have access to an owners manual you might check with your dealer,( again probably for a nominal fee)
Hope this helps!!
Junior
e-mail= [email protected]
SOURCE: does anyone know how to program the keyless remote
The HD alarm is REALLY complicated. 10 pages in the manual. I'd have the dealer order you an owner's manual for about $20. If you just can't start the bike, one long push on the remote sets it and 2 quick clicks turn it off.
SOURCE: I need the torque specifications for the rear
Your wheel is 95 to 110 ft lbs
Brake Disk is 30-45 ft lbs ( lock tight)
Pulley i( belt Sprocket) is 55-65 FT Lbs Lock tight red on both.
SOURCE: Step by step how to on handle bar replacement, on
If you are staying with the same style of bars you have it's pretty simple. Just loosen the clutch lever and front brake brackets then remove the clamp on the dog bones. If you are going to a different style of bars do the same except be sure the clutch and throttle cable are the right lenght for the bars you are going to use.
223 views
Usually answered in minutes!
×