20 Most Recent
1995 Yamaha XJR 1200 Questions & Answers
What are the recommended inflation pressures for
hi, the presures recomended for a yamaha xjr 1200, 1995-1998running tyre sizes
front 130/70/17 presure is 2.5 bar =36psi with or without a pilion
rear 170/60/17 presure is 2.5 bar =36psi solo and 2.9bar 42psi with a pilion
hope this helps, and thanks for using Fixya,
paul
My 1995 yamaha vmax motorcycle starts fine. when
have them test the cdi box. it is your electronic controler for your ingnition timeing. it could be getting hot and shuting down. when it shuts down. the can take a wire from the negative side of the coil and ground it to the frame touching it and letting go of it instintly and if it sparks its not the coils it will be the cdi box or something to do with the electronic pickups in the motor that gives the signal to the cdi. that it is the correct time to trigger firing. hope this helps out.
The clutch on my 83 Yam. Venture has fluid
Mate.With older bikes,the clutch plates will sometimes stick together.Say there is 8 plates.5 stick together and it just wont slip properly.Pull it apart.Clean each plate.It MUST go back together in the same order as it came apart.Not a hard job but do it slowly and double check all parts are in order.You can do this, but you will never walk out of a shop without a good bill.Hope this helps
Not finding what you are looking for?