20 Most Recent
2008 BMW HP2 MegaMoto Questions & Answers
Engine dying
Check your kick stand sensor if it's unplugged then there is your problem.
If it's still plugged in then the sensor might be gone.
The sensor shuts the bike down if you try to take off when the kick stand is down.
you can bypass the sensor by jumping the two wires before the sensor with a piece of wire connecting the two leads together.
doing so will allow the bike to be put into gear with the kick stand down so always check it so you won't have an accident.
Fuse for the headlights for 650 BMW 2008
On a 2008 BMW 650i, the fuse for the headlights is located in the fuse box under the hood. The specific fuse you need is Fuse #61, which is a 20-amp fuse located in the third row of fuses from the top.
To access the fuse box, open the hood and locate the black plastic cover on the right side of the engine bay. There should be a diagram on the underside of the cover showing the layout of the fuses. Once you've found the correct fuse, you can use a fuse puller or a pair of needle-nose pliers to remove it from the fuse box.
It's always a good idea to check the owner's manual for your specific vehicle to get the most accurate and up-to-date information on the location and function of the various fuses.
2017 BMW HP4 Race owners manual
BMW Owners Manual PDF ,ALL MODEL- get your manual now!
https://www.repair-guidebook.com/bmw-owners-manual-pdf-free-download-pdf/
Not finding what you are looking for?