20 Most Recent 2009 Yamaha Stratoliner Questions & Answers

This might help you: http://www.starbikeforums.com/forums/showthread.php?t=7668

You didnt say if it is a cruiser or street so here is both:

1. Cruiser
   • 1 Remove the seat from your motorcycle. Turn the key to the "On" position and hold it there as you lift up on the seat to unlock it.
   • 2 Put on the gloves and the safety glasses. Remove the plastic cover on the battery compartment.
   • 3 Detach the cables connected to the terminals on the top of the battery. You can pull the cables off by hand. Remove the negative (black) cable first, then the positive (red) cable. Cover the negative battery terminal with black electrical tape.
   • 4 Lift the battery out of the compartment. Be sure not to touch the terminals to any metal components of the frame or the seat.
   • 5 Position the new battery. Connect the positive cable to the battery first, then the negative cable.
   • 6 Reattach the seat.
   Street Bike
   • 1 Lift or remove the seat on your bike. Use the ignition key to unlock the mechanism holding the seat in place. Depending on the model, tilt the seat back or lift it completely off the bike.
   • 2 Locate the two anchor bolts on either side of the gas tank. Unscrew the bolts using an Allen wrench. Hold on to both the bolts and the bushings on the underside of the bolts. The bushings prevent your gas tank from rattling during operation.
   • 3 Tilt your gas tank up to reveal the battery compartment. It is necessary to prop up the gas tank or have a helper hold it for you as you work on the battery.
   • 4 Detach the cables connected to the battery terminals. Remove the negative (black) cable first, then the positive (red) cable. Cover the negative battery terminal with black electrical tape.
   • 5 Lift the battery out of the bike, being careful not to touch the terminals to any part of the motorcycle or your skin.
   • 6 Position the new battery in the bike. Connect the positive cable to the battery first, then the negative cable.
   • 7 Reposition the gas tank and secure it by tightening the bolts.
   • 8 Close or reattach the seat

If you need further help, reach me via phone at https://www.6ya.com/expert/john_31c836b20f0c2290

buy a service manual

take 2 shop! lol. there r sum things u just cant do,with out the tools, and the no-how!lol.

When you change to a non stock exhaust system and add new electronics, the bike needs to be hooked up to a diagnostic machine to map out new fuel delivery to compensate for the changes. It's possible that one or more of the changes you made will not be compatible with your camshaft profile, or fuel parameters. You may even need to have the engine dyno'd to see what's happening with the torque and horsepower curves.

why?

I would give them a call and see what they say. Yamaha Motors USA customer relations 6555 Katella Ave. Cypress, CA 90630 United States (Map) Phone: 714-761-7300 Fax: 714-761-7302 Toll Free: 800-962-7926

This is a highly ill - eagle act to do. In the old days we would put an electric drill on the drive cable, but now they make them tamper proof so they only go one way. The bezels are crimped on so you can't get inside them. I expect modern one may be electronic. How will your insurance company know what mileage you have done? I have never known an insurance cancel or fine due to mileage. You should have just disconnected it when you got close to the limit. Buy a used one and use them for 6 months in turns. There are two or three here 23K and one with 36k https://www.google.com/search?q=2002+yamaha+sr125+speedometer ..

Not mentioned in the Service manual http://www.badrad600.com/Yamaha_Radian_Factory_Service_Manual_OCR.pdf https://www.google.com/search?q=1986+Yamaha+YX600+Radian+remove+USA+speed+restriction Something like this?

Removing 95bhp restriction ' Yamaha Star Cycle V-Max ...

vmaxforum.net https://www.vmaxforum.net > threads > removing-95bh... Jan 14, 2013 - Air jets could easily become blocked. Step 3: Removing the speed restriction. On the back of the speedo-needle a disc with two different . ..

Check the diagrams here https://www.google.com/search?q=yamaha+sega+81+firing+order ..

Question edited for a lot more clarity, add maker. Question moved to Yamaha Motorcycle. Unlikely to be a carburetor problem as this appears to be fuel injected! https://www.google.com/search?q=Yamaha+Mio+125+MX+no+start ..