Initially install and tighten cylinder head bolts to 48 ft lbs. then remove all head bolts and oil threads.
then torque all bolts to
step 1 22 ft lbs.
step 2 33 ft lbs. DOHC
37 ft lbs. SOHC
step 3 additional 90 degrees
good luck
There are 2 different 1.9 engines, so for future ref, you need the 8th digit of the VIN number. use NEW bolts. torque to 22 ft lbs. then turn 90 degrees, then another 90 degrees.
SOURCE: Head Bolt Torque for a 2000 Grand Cherokee Laredo 4.0L
the torque is a 4 step process
1 torque all bolts to 22 ft/lbs
2 torque all bolts to 45 ft/lbs
3 recheck all bolts to 45 ft/lbs
4 torque bolts 1 thru 10 to 110 ft/lbs
bolt 11 to 100 ft/lbs
bolts 12 thru 14 to 110 ft/lbs
bolt #1 is the fourth bolt from the front on the passenger side....#2 is the fourth bolt on the drivers side then you continue in a clockwise order
SOURCE: head bolt torque specs for 2000 dodge neon 2.0 SOHC
I have the specs and diagrams. If you want me to send them to you, give me your email address. [email protected]
SOURCE: need torque specs for 2000 chevy malibu 3.1 cyl
(step 1 ) the torque specs for the heads are---1998 through 2001 are 37 foot lbs. ( step 2) rotate an additional 90-degrees (1/4 turn). intake manifold bolts ( lower ) step 1-- 62 in-lbs, step 2--115 in-lbs. intake manifold bolts/studs ( upper ) 18 ft-lbs. this is for the 3.1 v-6, have a good day!
1,287 views
Usually answered in minutes!
×