Chang my gmail language from spanish to english

If the language on the dash display of your 2010 Nissan Murano switches back to Spanish after the car restarts, it is possible that the language preference for the display is set to Spanish in the vehicle's settings. In order to change the language for the dash display to English, you will need to access the vehicle's settings and adjust the language preference accordingly.
Here are the steps you can take to change the language on the dash display of your 2010 Nissan Murano:

1. Press the "Menu" button on the dashboard to access the main menu.
2. Use the arrow buttons on the dashboard or the steering wheel controls to navigate to the "Settings" menu.
3. Navigate to the "Language" option and select it.
4. Use the arrow buttons or steering wheel controls to select the desired language for the dash display. In this case, you will want to select "English."
5. Once you have selected the desired language, press the "OK" button to confirm the change.
6. Exit the menu and restart the car to see if the language change has been applied to the dash display.

It is important to note that the specific steps and menu options may vary depending on the specific model and year of your Nissan Murano. If you are having difficulty changing the language on the dash display, it may be helpful to refer to the owner's manual or contact a Nissan dealership for assistance.

I'm assuming you're referring to the Bluetooth settings of the vehicle. Here's how to change language settings:1. Turn the vehicle's ignition on (no need to start engine) and turn the radio on with the volume at an audible level.

2. Press and hold the TALK switch until the Radio displays the message "Please Wait". The Hyundai Bluetooth system will reply in the currently used language that it is changing to the next language.

Note: The languages cycles between English, Canadian French, US Spanish, and back to English.

3. When complete, the radio display switches back to the radio.

4. Repeat steps 2 and 3 for the next language selection.

Found this in Note Owners Manual, hope it helps.

Language set-up mode
In order to enter the language set-up mode proceed
as follows:
1) Make sure the audio unit is switched off.
2) Press and hold buttons 1 and 4 simultaneously.
3) Press the power button and the radio will switch on.
4) Release all the buttons and the display will show
LANGUAGE.
5) Press the << or >> button and the language
setting display will change as follows:
ENGLISH ? FRENCH ? GERMAN ? ITALIAN
?DUTCH?SPANISH?POLISH?ENGLISH
Once the language has been set, switch off and
switch on again the audio unit by pressing the power
button.

You will need a clip tool or dealer can change language will take 5 minutes

I tried to follow the directions in the owners manual. It didn't work. So I called GM. I was told I would have to go to Onstar. Onstar said they could change my bluetooth from Spanish to English, but I would have to subscribe to Onstar.

KESS V2 can support English, French, Italian , Dutch ,Portuguese and Spanish.

1. Press and hold the personalization button (2) and the trip information button (1) at the same time. The DIC will begin scrolling through the languages. Each language will be shown in that particular language (English will be in English, French will be in French, etc.).
2. When the preferred language appears, release both buttons. The DIC will then display the information in the language that was selected.


Hope this helps....

1. Press and hold the personalization button (2) and the trip information button (1) at the same time. The DIC will begin scrolling through the languages. Each language will be shown in that particular language (English will be in English, French will be in French, etc.).
2. When the preferred language appears, release both buttons. The DIC will then display the information in the language that was selected.




Hope this helps...

{: ) Press the customization button (the button on the steering wheel with a bold letter i ) until LANGUAGE: ENGLISH appears in the display. To select your preference for display language, press the select button (bent arrow symbol) while LANGUAGE: ENGLISH is displayed on the DIC. Pressing the select button will scroll through the following languages: • ENGLISH (default) • FRANCAIS (French) • ESPANOL (Spanish) Choose one of the available options and press the customization button while it is displayed on the DIC to select it and move on to the next feature.
If you accidentally choose a language that you do not want or understand, press and hold the customization button and the trip information button at the same time. The DIC will begin scrolling through the languages in their particular language. English will be in English, Francais will be in French, and Espanol will be in Spanish. When you see the language that you would like, release both buttons. The DIC will then display the information in the language you chose.
You can also scroll through the different languages by pressing and holding the trip reset stem for four seconds, as long as you are in the odometer mode.

move to mexico ?

hahah - kidding -
take down the vin number - and call ur local dealer - ask them if any recalls have been made for YOUR vehicle and also go and show him the spanish - they will love to help u -most likely for free -