Hi.i need the torque settings for the cylinder head on a toyota prado 3.0td.thanks

Question edited for clarity and apparently it is a GXL not GLX.
Question moved to model category.

106 INCH Pounds, or 9 foot pounds.

2000 Toyota Land Cruiser 4.7L Engine Torque Specs

https://toyota-specs.com > cars > cruiser4.7 > torque-spe...
Valve Covers Installation The valve cover bolts torque down to 106 in-lbs or about 9 ft-lbs in a criss cross order. Be sure not to miss any bolts to avoid ...

1. Africa "?
2. NO CAR TOLD 2015 (GDx) X= 6= CYLINDERS.
3. NO YEAR CAR TOLD
4. IS ENGINE TURBO, AS SOME ARE,AND MATTERS.
5. COMMON RAIL DIESEL SURE.
6. Global Diesel Six Cylinder?
7. ENGINE CODE : 2GD-FTV 2015- 2.4 L (2.393 cc) INLINE 6
   

MUST WE GUESS THIS?????????
THE WIKI LIST ON 1GD OR 2 GD.

Applications

Hino 200[14][12]
Toyota Coaster (B70) (2022-present)
Toyota Dyna[11]
Toyota HiAce (H200) (2018-present)[15]
Toyota HiAce (H300) (2019-present)[16]
Toyota Hilux (AN120/AN130) (2015-present)[17]
Toyota Innova (AN140) (2016-present)[18]
Toyota Land Cruiser Prado (J150) (2015-present)[17]
Toyota Fortuner (AN150) (2015-present)[19]
Toyota GranAce/Majesty (H300) (2019-present)[20]
Yanmar 4LV (marinized version of 1GD-FTV)[21][22][23][24][25][26]
Thairung Transformer II

This manual has everything but cam torque

http://www.championbrands.com/aera-torquespecs.pdf

try here Toyota Workshop Manuals

hi lucille.
this is all i could.
go to this link and scroll the page you might fond something to help you out.
Torque settings on big end bearings and cylinder head on 2 5 d4d quantum...

1997 Toyota Prado 5VZ-FE
Cylinder head bolts:
Tighten the cylinder head bolts in criss cross manner inside out, in four stages as under:
Stage 1. Torque the bolts up to 17 Nm.
Stage 2. 34 Nm.
Stage 3. Rotate all the bolts 90 degrees.
Stage 4. Finally rotate all the bolts further 90 degrees.

Main Bearings:
Tighten the main bearing bolts in two stages, as under:
Stage 1. 61 Nm.
Stage 2. Rotate the bolts further 90 degrees.

Big end bearings:
Tighten the big end bolt of connecting rods in two stages as under:
Stage 1. 25 Nm.
Stage 2. Rotate the bolts further 90 degrees.

Check out the help links mentioned below:----
Cylinder Head Torque Setting http://schematicsdiagram.blogspot.com/2012/10/cylinder-head-torque-setting.html
----------- Lexus LS400: Transmission or Torque Converter? http://technoanswers.blogspot.in/2012/04/lexus-ls400-transmission-or-torque.html

----------
For more help.keep updated.
Thanks.

cylinder head the torque is : step 1 55 ft-lb, step 2 65 ft-lb, step 3 85 ft-lb. Rocker arm stud nut or bolt is 17 to 23 ft-lb. and valve cover bolt 72 to 108 in-lb.

cylinder head bolts:

step one: 22 Ft-lbs.
step two: tighten additional 90 degrees
step three: tighten additional 90 degrees

Cylinder Head Torque Sequence

Tightening torque:
12 sided bolt
Step 1 ..... 34 Nm (25 ft lb)
Step 2 ..... Tighten an additional 90°
Step 3 ..... Tighten an additional 90°
Recessed head bolt ..... 18 Nm (13 ft lb)