At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: HOW DO I REMOVE THE COVER OF REAR BACK DOOR 2003 BMW...
You need to remove arm rest (2 screws usually covered w/plastic caps) and door handle release (2 screws) then pry door panel upwards (it's held on by small clips)
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Yes. It's called the "rear main" (crank) seal. To repalce it requires the temporary removal of the transmsission. It could also be from leaky valve cover gaskets, a front main (crank) seal or from a number of other sources. Even a leaky oil drain plug seal.
underneath rear seat is a panel you can take off if that is what you are looking for. Grab rear seat and pull up hard right behind front seatbacks or said differently, not in the center. It is held down in two areas at edges.
The first thing to do is put the front tires on the back and see if there is a difference.It could be a bad tire,or a balance problem.There could be worn front end parts and that will show up as movement in the wheel by moving the tires back and forth.worn tie rods or ball joints can cause a vibration.If the vibration is when the brakes are applied,then the cause is most likely a warped rotor.Check the temperature of the front rims and if one is much hotter than the other there could be a sticking caliper,which will cause the rotor to heat up and cause a vibration.
remove cover between seats to expose cable adjusters and back them off till slack. jack up rear of car (chock front wheels) remove a rear wheel stud and you can view the star wheel adjuster inside the drum, with a thin screwdriver wind it up till wheel locks then back off about 15 clicks, do same on other wheel, wind up adjusters inside car till wheels lock at about 5 clicks, check for binding when h / brake is fully down, thats it.
×