At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi Jennifer-
I believe I may be able to help you with the gas spillage you are having when filling the tank. This happened on my 1998 Toyota Camry.
One day, even though I was low on fuel, the attendant had trouble adding gas to my tank. Gas would spill during filling or the nozzle would click off (as though it was full) even though it was not. I had to stand there myself and slowly add gas until the tank was full.
I learned that my car had a thin vent tube that would run from the gas tank to the gas tank opening. As gas is rushing into the tank during filling, the air that is being displaced from the gas tank escapes through this tube. This tube had rusted closed a bit and was restricting the air flow escaping from the tank during pumping causing the problems I described. Once this tube was replaced, my problem was solved!
Hope this helps!
its usually under the car body in front of the gas tank.. looks like either a small plastic or metal can mounted horizontally with 2 hoses connected to it..about the size of your little finger..
If not mistaking you will found it under the brake booster by inner fender bettwen strut tower and firewall, if no filter there it is part off your fuel pump, inside your gas tank.
Either the handle is broken inside the door, or the clip that holds the actuating rod is broken. If it either of these is shouldnt take any more than an hour to fix.
Go to your nearest Toyota dealer. Purchase this part number: 77360-22020; approx 4 dollars.
Open the fuel door. Being careful, remove the leftover plastic that is hooked by the door hinge. Insert the new spring assembly under the slot, and press it in until it clicks into place. Very easy to do.
Hope this helps, and thanks for choosing FixYa.
×