Cars & Trucks Logo

Related Topics:

Posted on Apr 07, 2010

98' Dodge Ram 2500 4x4 back-up lights switch in the steering column not working right. Flashes on/off between R and N and wont stay on. Where is the switch located

5 Related Answers

Anonymous

  • 710 Answers
  • Posted on Apr 24, 2009

SOURCE: 98 dode ram wont crank no spark

May have no spark due to a bad crank sensor, which is responsible for spark when it gets a pulse through the cars' computer.

Ad

marionbagget

  • 718 Answers
  • Posted on May 08, 2009

SOURCE: Where is the reverse light switch on a 1999 Dodge Ram 1500 with automatic transmission located?

Look on the gearshift lever. You will have remove the cover to get to it.

Anonymous

  • 5 Answers
  • Posted on Jun 02, 2009

SOURCE: Reverse light switch on 1995 Dodge Ram 1500

switch is just above trans pan and below shift linkage requires a thin (crome 1" socket) to remove

Anonymous

  • 83 Answers
  • Posted on Jul 23, 2009

SOURCE: How do you change the front universal joints on a

The drive shaft will need to be removed. Remove ujoint cap clips from yolk and shaft. Should be four all together.tap out the u joints.
Remove cap from new ujoint. place into yoke from outside. Slip ujoint inside, attach to cap. press ujoint into housing. do the same with drive shaft side. Dont forget to put the new clips provided, on the shaft and yolk

Robert Debison

  • 412 Answers
  • Posted on Aug 31, 2009

SOURCE: 98 dodge 1500 ram speedometer not working sender

ABS LIGHT ON AS WELL?IF SO..I WOULD LOOK AT ABS SENSOR IN REAR DIFFERENTIAL..GETS SPEED SIGNAL FROM THIS SENSOR AS WELL..USES ONE IN TRANS FOR TRANS SHIFTING

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers
0helpful
1answer

Changed rack and pinion. when turning wheel to right horns started blowing. unplugged airbags and horn stopped. drove truck for 1 day now wont start and dome light is blinking and warning lights on dash...

It sounds like you disturbed the wiring or the connector inside the lower portion (inside the cabin, under the dashboard) of the steering column. You may have also pinched wiring higher inside the steering column, up near the horn button. You'll need to track it all down & correct the wiring problems in (and around) the steering column.
0helpful
1answer

Headlights stay off until I adjust the steering wheel on my 2001 ram

Short in multifunction switch or wiring through the column .
1helpful
2answers

2006 dodge ram left rear turn does not work, changed bulbs, changed sockets, left front flashes fast, would it be multi function switch in steering column?

If the front one is flashing, then it is not a multi function switch problem. We see lots of wiring issues due to water intrusion and corrosion so you need to follow the wiring to the front and check all the connectors along the way. We also see lots of TIPM problems, which is the large underhood fuse box and this is where the power for the light comes from.
0helpful
1answer

My 98 ram's cab lights stay on and blink off and on while i am driving, also my front right turn signal light does not work, it is not the bulb? what do you think it is?

The reason ur cab lights go on and off is from the door sensors on the door frame are not sending the correct signal to the light. Ur turn signal is either ur turn signal switch on your steering column or your turn signal relay
0helpful
1answer

The only way my headlights in my 1999 dodge ram worked was if i did Tilt Wheel know they dont come on at all...went to a dodge dealer and the answer i got was NEVER HEARD OF THAT....Ya right!can any shed...

If tilting the wheel turned the headlights on, it sounds like there's a problem with the ignition switch. Or if the headlight switch is a stalk on the steering column, possibly a fault somewhere in that switch or the wiring to it. First thing to do is find the headlight fuses and see if you have power on both sides of the fuse with the key on. If you don't, i would take the steering column covers off and look for a broken wire or burnt connector at the ignition switch.
2helpful
1answer

On a 2002 dodge ram 1500 truck the brake lights and the turn signals and winshield wipers dont work the only brake light that works is above the cab. and the turn signal flashes on the dash like they are...

I suspect a bad multi function switch located in the left hand side of the steering column. This switch controls your high/low beams/wiper delay/windshield washer/turn signals and hazards.
1helpful
2answers

Head lights wont stay on

Check your steering column. There is a switch that cancels the turn signals in there. If it's bad, your signals will act funny and this also affects the hazard switch. Banging on the dash is what triggers the signals to work as the vibration goes into the steering column also. You might also want to check the fuses, relay switch, located inside the the left fender next to the steering column. Sometimes, the radio and the turn signals will go funky at the same time. Make sure your radio is grounded.
Hope this helps.
Cheryl
1990 Dodge Daytona 2.5 ltr. Automatic
0helpful
1answer

1998 dodge ram 1500 high beams stay on even when the truck is shut down and key removed

Most likely the dimmer switch in the steering column. It has power to it all the time and it also works the lights. It will be a direct short.
Not finding what you are looking for?

148 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...