My mitsubishi pajero keeps blowing a fuse,but the problem is,the writing on the fuse box cover is in japanese or chinese,which makes it hard to find out what fuse is.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you have to test them with a pressure gauge which is normally on the fuel rail on the engine. You can often hire the gauges from AutoZone. As regards to 'not working', you should be able to hear the pump when the ignition of switched off. Check the fuse and the relay if you suspect sabotage.
Yes, there is a fuse for the super select lights on the dash in your 2002 Mitsubishi Pajero Limited Edition. The fuse is located in the fuse box under the hood.
The fuse box is labeled with a diagram of the different fuses and their corresponding amperage ratings. The super select lights fuse is typically labeled as "F11" or "11" and has an amperage rating of 30.
If the super select lights on your dash are not working, it is possible that the fuse is blown. To check the fuse, you will need to remove it from the fuse box. If the fuse is blown, it will have a broken metal strip running through it.
To replace the fuse, simply insert a new fuse with the same amperage rating into the fuse box. Once the fuse is replaced, the super select lights should start working again.
Here are the steps on how to check the fuse for the super select lights on your 2002 Mitsubishi Pajero Limited Edition:
Locate the fuse box under the hood.
Open the fuse box cover.
Locate the fuse for the super select lights.
Remove the fuse from the fuse box.
Inspect the fuse for a broken metal strip.
If the fuse is blown, replace it with a new fuse with the same amperage rating.
Close the fuse box cover.
Turn on the super select lights.
If the super select lights are still not working after replacing the fuse, there may be a problem with the super select lights themselves or with the wiring. In this case, it is best to take the vehicle to a qualified mechanic for diagnosis and repair.
I would have just sent you the diagram but was unsure which one you needed but here is a link for all all the fuse charts http://www.pocuk.com/faq/fuses.htm
hi
could it be possible to get a fuse box translation in english my pajero is 1993 2.8 exceed
the car is a japanes import and the writing on the present internal fuse box is all in japanes
×