Posted on Feb 12, 2010

Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Front lights blownhow do i change it

Front lights blown

1 Answer

Anonymous

Master 714 Answers
Posted on Feb 12, 2010

Anonymous

Master

Joined: Jan 21, 2010

Answers

714

Questions

Helped

316810

Points

1893

Should be Headlight Bulb #9006 and will cost about $20 per bulb.

Look on the back of the headlamp remove the plug, remove the boot and you will see a clip holding in the light bulb.

Unhook the clip the bulb will come out with a little force.

Don't touch the glass on the new bulb re-install.

Hope this tip helps.

R/
David

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

2answers

What causes blinker to blink real fast

Could be a bad bulb ,plug, wire, or flasher; Check the side marker lights also, some are connected to the turn signal.

Read full answer

Nov 27, 2016 • Cars & Trucks

0helpful

1answer

Front light cornering on Renault Clio not working have changed bulb and checked fusers

light no working
fuse or bulb not blown says the earth is bad

front bulb needs an earth to complete a circuit

Read full answer

Oct 29, 2016 • Renault Cars & Trucks

0helpful

3answers

How to fix Rapidly blinking left turn signal on 2007 BMW 328i?

One of the bulbs is not working. Check and fix.

Read full answer

Jan 14, 2013 • 2007 BMW 328i Sedan

1helpful

1answer

How to replace bulb in front bumper turn signal housing 1995 jag xj6

hello,

Identify the blown bulb. Note that if a headlight bulb has blown, the dip beam is on the outside and the high beam is on the inside. Turn off the ignition switch and light switches.

Open the hood and replace any blown headlight bulbs. Press the plastic spring clips and remove the bulb holder from the assembly. Pull the bulb out of the bulb holder and replace it with a new bulb. It only fits one way. Be sure not to touch the bulb's glass. Replace any parking lights at the same time, they are in the headlamp unit too.

Remove the front turn signal light unit in the bumper to change the turn signal bulb. Push gently on the inside edge and insert a blade between the bumper and the lens at the outside edge. Compress the spring and remove the lens. Fit a new lamp by inserting it into the plug. The side marker light is changed using a similar process.

Open the trunk to replace the rear fog light, stop light, tail light, reversing light and turn signal light. Remove the rear light cover and turn the bulb holder fastener 90 degrees counter clockwise. Remove the expired bulb, fit a new one and replace the parts, turning the bulb holder clockwise.

Thanks..

Read full answer

May 21, 2011 • 1995 Jaguar XJ6

0helpful

1answer

Where is the fuse for the right side tail light?

hi if it is only the one bulb not working/tail light and the front light on same side is working along with number plate and other tail lights may i suggest you replace/check the bulb on defective light as if fuse had blown ? the front light on same side would not be working if you put ignition on and press brake your brake light shoul work ? if so change the bulb as the bulb has two elements inside tail light and a higher wattage element for brake light

Read full answer

Feb 25, 2010 • 2004 Honda Accord

0helpful

1answer

1998 pontiac transport/montana has not tail or break lights...turn signals blink fast or not at all. changed rear bulbs and noticed carbon on front build up on front bulbs. Help!

If one of the filaments in the bulbs is burned out, the remaining working lights will flash alot quicker.
Check the bulbs, and replace if the filaments are broken.
If the front bulb has a carbon build up it blown out...change it..
Once the bulbs are replaced your signals should work properly.

Read full answer

Dec 09, 2009 • Pontiac Trans Sport Cars & Trucks

2helpful

2answers