I CHANGED MY REAR BRAKE PADS , NOW MY SERVICE DRIVING STABILITY,AND ABS LIGHTS ARE ON AND POWER STERRING IS STIFF

problem usually narrows down to abs system problem or hub failing causing problem with abs --have vehicle scanned for the trouble code it will assist you as where to start in repairing problem most auto stores offer this service for free --in the mean time pull the abs fuse so brakes can revert to a normal non abs system till repairs can be made

The warning lights will stay on until the problem with the stability control and anti lock braking system is addressed and rectified.

If the warning lights are still showing there is still a problem with the system such as faulty wheel sensors.

NEVER lift a vehicle with Air Shocks because you will damage the Shocks themselves. Did you work on the Brakes? Air in your System? Break a Wire?

when you do the pads you will notice wires coming out of the front hubs clean up the plug ins .. its for the abs if the contacts get dirty your lights come on . start here other wise it can get complicated. do the same at rear i dont know if you have rear disc brakes you may not ??

Not a booster problem. what bad noises? abs problmes wont make noises, unless its the pump operating. ck the mushy pedal, that will maybe fix all problems. I dont think its related to the 2/4wd lights?

Check to see if your brake pads and rotors are in good condition. Or if you have replaced the pads yourself and have not reset the wheel sensors this would cause the ABS Antilock Brake System light and the ASC Automatic Stability Control light to stay on as the ASC uses the ABS brakes with computer assistance to control the car

Check to see if your brake pads and rotors are in good condition. Or if you have replaced the pads yourself and have not reset the wheel sensors this would cause the ABS Antilock Brake System light and the ASC Automatic Stability Control light to stay on as the ASC uses the ABS brakes with computer assistance to control the car

Check to see if your brake pads and rotors are in good condition. Or if you have replaced the pads yourself and have not reset the wheel sensors this would cause the ABS Antilock Brake System light and the ASC Automatic Stability Control light to stay on as the ASC uses the ABS brakes with computer assistance to control the car

car is sensing a problem with the stability control system (DSC) or the antilock brake system (ABS). usually an ABS problem will turn off the DSC, so DSC may be ok, just ABS needs a look at.

since its an '08 model, it should still be covered by the BMW warranty provided you live in the USA. take it in and have them fix it. not safe driving with both systems deactivated.

please send $100 to me and ill send you solution.. I was interested in your service until i heard some of your answers like requires expert must take to pro??? gee thanks for $15 advice