SOURCE: Windshield washer fluid will not pump
the windshield washer pump might be bad. It should be located somewhere on the reservoir
SOURCE: windshield washer fluid reservoir - MB ML 350
right where the lines connect to reservoir, has little black seals that leak. I recommend removing reservoir, empty it out, then use RTV silicone and place it between seals and reservoir. Let it dry for FULL day. than reinstall.
SOURCE: Windshield washer not working properly
If you have used ANYTHING beside windshield solvent in you reservor, you may have created WAXING from soap in the bottom of washer tank, which clogs pump,lines, and nozzel....take the tank out and wash it..disconnect washer hoses at nozzel and clear with compressed air along with the nozzel...if you use solvent only you may have a worn washer pump or restriction...check those and good luck.....
SOURCE: Replace 2001 silverado 1500 4x4 windshield washer fluid reservoir
the only solution acording to the manual is to replace the reservoir... not much to say about that, u do have the option to patch it...be careful with the product u use to glue that patch.
take care
SOURCE: Windshield wiper fluid reservoir goes dry
After you pour the stuff in watch where it comes out. It is buried in the fender ...drivers side. Wheel well shield is removeable.
92 views
Usually answered in minutes!
×