Https://www.youtube.com/watch?v=0eIuOZwgbkc This video will help you
SOURCE: Replacing Blower Motor Resistor
SOURCE: Where is the blower motor resistor on a 2003 Chevy Malibu
Remove the shroud below glove box, 2 screws and a snap-pop fitting. Be careful of the courtesy light. Remove the blower moter and disconnect the purple/black power connector to it - - you'll need this extra room to work with. 2 more screws, same size, 6.5mm on mine, 7or 8mm on some others, that holds the blower motor resistor in place. This replacement part is less than 40 bones at most parts store. Unplug, replace, re-install, test and you're on your way with about 2 hours of slow paced effort in your own driveway. Typical cost at a garage - up to $400, what a sham.
SOURCE: 2003 Chevy Malibou RU872 resistor location blower switch relay
For location and replacement of the BMR. Remove the shroud below the glove box, 2 screws and a snap-pop fitting. Be careful of the courtesy light. Remove the blower moter and disconnect the power harness - - you'll need this extra room to work with. 2 more screws, same size, 7/32, 6.5, 7or 8mm on some, that holds the blower motor resistor in place. This replacement part is less than 40 bones at most parts store. Unplug, replace, re-install, test and you're on your way with about 2 hours of slow paced effort in your own driveway. Typical cost at a garage/dealer - up to $400.
SOURCE: How do i change the Blower motor resistor on a 2005 chevy impala?
The blower motor resistor is located behind the glovebox mounted in the fan housing box under the dash.
SOURCE: 2003 tahoe rear blower does not work---resister
got her fixxed in 10 min.----send me $12.99 and ill tell you how to fix yours at home . thanks
64 views
Usually answered in minutes!
×