At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
D7F ENGINE Preseating the gasket Tighten all the bolts to 2 daN.m, then angle tighten to 90°
Wait 3 minutes settling time.
Tightening the cylinder head: The cylinder head is tightened in stages, applying the following procedure successively to bolts 1-2 then 3-4, 5-6, 7-8 and 9-10.
- Slacken bolts 1-2 until they are completely free. - Tighten bolts 1-2 to 2 daN.m, then angle tighten to 200°. Repeat the slackening and re-tightening operation for bolts 3-4, 5-6, 7-8 and 9-10.
I hope this is useful, Enjoy
The tappet clearence should be in the owners handbook but it's a bit early a tappet noise from the engine (2006) ! Check oil level and change if it's overdue a service is definately worth a look ! Good luck
hallo first let me know year, engine code (or at least typ of engine 1.2, 1.4...). and I will send you picture for timing belt. and it will (did) bend valves, so you`ll have to remove cilinder head *** well.
Use new bolts, tighten in the following stages
1. 20Nm
2. 100Nm
3. wait 3 mins
4. slacken bolts 1&2 retighten to 20Nm +110 degrees
5. carry out stage 4 for bolts 3,4,5 & 6
then bolts 7,8,9 &10
Sequence,8 4 1 5 97 3 2 6 10
Bolts 9 & 10 are flywheel side of the engine.
×