SOURCE: Truck Radio/CD Player, no sound coming out of speakers
Have you check the mute mode, maybe it is in mute mode.
SOURCE: radio doesn't work after battery change
you have to get the code from the dealer to unlock it.
SOURCE: 2007 jeep commander rocky mountain no sound from radio
take it to the dealer. they will put a new radio in it if you have under 36000 miles
SOURCE: NEED 2007 CHEVY MALIBU RADIO CODE
I just got the code for my radio by calling 1-800-537-5140 and choosing the option for my vehicle make. 1 for chevrolet. then i entered 106010 for the customer # and then entered my serial # from the stereo and it gave me a lock code for free. Now i am just trying to figure out how to enter it since my manual tells me to take it to the dealership. Now that you have your 4 to 6 digit code, you can enter it by following the these steps. 1. Make sure your ignition is in the "on" position, but no started. 2. Press/Hold the "HR" button to set the first 2 or 3 numbers. 3. Press/Hold the "Min" button to set the next 2/3 numbers. 4. Press the AM/FM button one time. "SEC" should be displayed. You can now turn the radio on. Good luck!
SOURCE: HOW DO YOU REMOVE RADIO FROM 2007 CHEVROLET MALIBU
at the bottom of your dash you will start seein bolts you have to take out almost all the bolts around the bottom line there should be 8 or ten. The tricky part is gettin the two in the corners of the glove box. its not to hard from there then you pop everything out til you get to the bolts around the stereo. i would recommen not tryin to tear ur car up so take ur time if it feels tight look for another bolt cuz you dont wanna break tha clip at all.. if you have any other problems from there then idk its just the bolts n poppin all the clips.
60 views
Usually answered in minutes!
×