How to replace license plate bulb in 2004 dodge stratus

SOURCE: License plate bulb replacement

you have to carefully pry the bulb holder out and remove the bulb by turning it counterclockwise while pushing in. Replace the new lightbulb the reverse mode.

SOURCE: 2002 license plate bulbs

its real simple look at the license plates then look up you will see 2 screw per lamp / unscrew them and slide remove its a 194 bulb so get some ready then replace and put back / Please rate my response thank you very much

SOURCE: 1999 Dodge Neon rear license Plate bulb

LICENSE PLATE LAMP BULB
REMOVAL

1. Remove screws attaching license plate lamp to rear bumper
2. Remove lamp from bumper.
3. Remove bulb socket from lamp.
4. Pull bulb from socket.

1. Install bulb into socket.
2. Install bulb socket into lamp.
3. Place lamp in position.
4. Install screws attaching license plate lamp to rear bumper.

SOURCE: need to replace license plate bulb on my 2005

1. Open the hatch and stand under it.
2. Remove pull handle from the inside of the hatch (2 screws under pop panels).
3. Starting in the lower corners, gently pry the entire interior panel from the hatch,
and leave it hanging from the wiper area near the glass.
4. Grasp the bulb housing and twist to the left while pressing inward.
5. Replace with a 1156 bulb.

SOURCE: dodge stratus 2004 head light bulb replacement

Headlight Bulb Replacement
1. Open the hood and remove the two headlight mounting
screws.
2. Remove the push-in fasteners for the grill area by prying under the
head of the fasteners with a flat bladed tool.