Where is the central locking modular situated on a Peugeot 308 petrol

SOURCE: peugeot 406 central locking

you need to reprogram the fob

SOURCE: peugeot 307 1.6 petrol central locking problem

leave ign off with key out 3mins disconnet battery 5 mins reconnett and press lock/ unlock repeatedly until locks cycle through to re sync try this any probs come back to me

SOURCE: problem with Central door lock on peugot 106

there is a switch attached to the back of the door lock that opens all doors, it may have fallen off or become damaged, or the mechanical connection to the lock may have snapped.

if the door itself does not even open with the key on its own, the lock mechanism has become detached from the locking rods inside the door, you would need to take off the door panel and look / feel inside near the lock, there is a thin rod connected to the actual locking part and the part the key is inserted into, as well as the internal lever to open or lock the car, it may have popped off. The key-lock itself is usually held on by a thin flat round circlip-washer affair, this may have slipped out too and the key-lock is not connected any more.

SOURCE: timing marks on peugeot 1.9 tdi

there is a few ways of doing thes the easiest way being using locking pins
you bont have to go and buy a set of locking pins you can use 3 m8 (13mm headded) bolts and a 5mm allen key

there is a hole in the cam pully and 2 holes in the injection pump pully and 1 in the fly wheel

i suggest you lock the fly wheel up first
the hole is located under the starter motor on the front of the block
insert the 5mm allen key and get someone to turn the crank pully clockwise until allen key engages into the fly wheel

the hole in the cam should be at about 25 past
(if it is at 10 to then you neet to remove the pin from the fly wheel and turn the crank 1 full turn)

when the hole is inthe right place you can insert a m8 bolt and wind it in to the head

with this now lined up you should be able to fit the other 2 m8 bolts into the injector pump pully

with this now done your 1.9 tdi engine is timed up

SOURCE: peugeot 308 problems

is it a 1.6 engine?