Where is transmition relay for 2006 Ram 1500 4.7

SOURCE: change water pump and thermostat and it's still overheating 2006 1500 dodge ram

overheating run the a/c on make sure the fan working .

SOURCE: thermostat locaiton on a 2006 Dodge Ram 1500 big Horn Editon

follow the lower radiator hose to engine block,you have to raise the vechicle remove thermostat from the bottom,besure secure vechicle with jack stands.

SOURCE: Where is the fuel pump relay on 2006 Dodge Ram 1500 4.7

There isn't a fuel pump relay , it is controlled by the totally integrated power module !

MODULE-TOTALLY INTEGRATED POWER

DESCRIPTION

The Totally Integrated Power Module (2)(TIPM) is a

combination unit that performs the functions of the

Power Distribution Center (PDC) and the Front Control

Module. The TIPM is a printed circuit board based

module that contains fuses, internal relays and a

microprocessor that performs the functions previously

executed by the FCM. The TIPM (2) is located in the

engine compartment, next to the battery (1) and connects

directly to the B+ cable (5) via a stud located on

top of the unit. The ground connection is via electrical

connectors. The TIPM provides the primary means of

voltage distribution and protection for the entire vehicle.

The molded plastic TIPM housing includes a base and

cover. The TIPM cover is easily opened or removed

for service and has a fuse and relay layout map integral

to the inside surface of the cover. The TIPM housing

base and cover are secured in place via mounting

tabs. The mounting tabs secure the TIPM (2) to the

battery tray mounting bracket (3).

OPERATION

All of the current from the battery and the generator output enters the Totally Integrated Power Module (TIPM) via

a stud on the top of the module. The TIPM cover is removed to access the fuses or relays. Internal connections of

all of the power distribution center circuits is accomplished by a combination of bus bars and a printed circuit board.

For complete circuit diagrams, refer to the appropriate wiring information. The wiring information includes wiring

diagrams, proper wire and connector repair procedures, details of wire harness routing and retention, connector
pin-out information and location views for the various wire harness connectors, splices and grounds.