SOURCE: Nissan Maxima 91 Rear Spoiler brake light broken
some of this cars have 1 fuse per side make sure to chek all the fuses some cars have more than one fuse box
SOURCE: 97 Nissan Maxima
360 hassle - since you have a check-engine light on, and your car is an OBD2 car (96 or newer), go to AutoZone and have the ECU scanned (it's free). They'll give you the fault code(s), which you can post up here, and we can diagnose it then.
SOURCE: Check Engine Light 1996 Nissan Maxima
The best way is to use a scan tool to clear the codes, that will turn off the light, also disconnecting the battery over night may work, but no completely sure about that, it varies from year to year.
SOURCE: brake light on nissan maxima 1997
First check your brake fluid. It may be low. If its low, have your brakes checked, they may be worn out and you may need brakes. If the master cylinder is tottaly empty, than you may have a leak. Here is a quick test for the E-brake switch. Look at the "brake light" while its on and pul on the e-brake while you are holding the release button in the handle. Pump the e-brake lever repeadetly and observe the "brake light" if it gets brighter and dimmes as you are pumping the e-brake lever., than the swithc is OK and you have a low brake fluid level. Hope this helps. let me know what you find.
SOURCE: 98 altima oil light on and off oil level fine car restarted and
If oil pressure is LOW this vehicle has a safety feature that will prevent vehicle from starting.(check oil level before you start) Now what I wan't you to do is to have the oil pressure switch checked or changed. This may be the reason why this vehicle is not starting or it can also be that the actual oil pressure is low. To check the oil pressure of the vehicle you will need an oil pressure guage. Remove the oil pressure switch and connect guage to oil pressure hole and check oil pressure while cranking vehicle.Some pressure testers can be connected to oil filter housing either is fine. If this vehicle has low oil pressure the reasons for that are bad oil pump, clogged oil pump pick up(from lack of oil change/poor mantainence) or bad connecting rod and main bearings but this usually have a warning from before (the engine will sound loud by knocking /clicking-tapping noise) It this was happening you may need to rebuild this engine or replace it. Good luck and Thanks for using FIX YA
175 views
Usually answered in minutes!
×