At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Is there anything else to check before changing the motors ? Yeah , hook up a factory or some other type of professional scanner an check for DTC'S - diagnostic trouble codes,also to see if the scanner will communicate with the modules. Changing batterys without a alternate power supply can cause modules to go to sleep permanently.
Power Sunroof System Components
The Power Sunroof and Sunshade System consists of the following components:
• Sunroof control module
• Sunshade control module
• Sunroof switch
• Sunshade switch
• Rail and track assembly upon which the sunroof and sunshade glass rides
• S/ROOF/SUNSHADE Fuse 30 A
• Body control module (BCM)
Don't be a parts changer, learn how to diagnose! So before you go wasting your money on parts not needed see if a professional scanner can communicate with all the modules on the vehicle.
The Power Sunroof System will operate only with the ignition turned to the RUN or Accessory positions, this allows for retained accessory power (RAP) control of the sunroof and sunshade through the body control module (BCM). With the ignition in the run or accessory positions, the BCM supplies the sunroof and sunshade control modules with ignition voltage which allows sunroof and sunshade operation. Once the ignition switch is turned to OFF the sunroof will continue to operate until any door is opened or when the RAP timer reaches its shut-off limit. For a description and operation of the RAP operation, refer to Retained Accessory Power (RAP) Description and Operation.
Circuit/System Description
The sunroof and sunroof shade modules supply each of the switch signal circuits with a 12-volt reference. When a switch is pressed the signal circuit is pulled low signaling the sunroof or sunroof shade open or close request. The modules determine the motor direction based on inputs received from the sunroof switches. When the modules reverse the polarity of the applied voltage, the motors reverse direction. The sunroof shade module contains the logic for opening and closing the sunshade based on Serial Data from the sunroof control module. Ignition voltage is supplied to the sunroof and sunroof shade modules by the BCM. B+ is applied to the sunroof and sunroof shade modules via the S/ROOF fuse.
The sunroof shade module contains the logic for opening and closing the sunshade based on Serial Data from the sunroof control module. The sunroof shade module internally applies voltage and ground to the appropriate circuits of the reversible sunshade motor in order to move the sunshade panel to the open or closed positions.
Sunroof Description and Operation (One Connector System)
Sunroof
This diagnostic procedure is to be used for the 1 connector Sunroof System that combines the sunroof control module with the sunroof motor/actuator.
The Sunroof System consists of the following components:
• BATT MAIN 2 Fuse 50 A
• Body control module (BCM)
• RAP relay
• S/Roof Fuse 20 A
• Sunroof module (includes sunroof motor/actuator)
• Sunroof switch
The Sunroof System is controlled by the sunroof switch and the sunroof motor/actuator assembly.
When the ignition is turned to RUN or ACCESSORY, or when the retained accessory power (RAP) system is active, the body control module (BCM) applies a ground to the RAP relay in the instrument panel (I/P) fuse block. This activates the RAP relay and allows battery positive voltage to be applied through the SUNROOF Fuse to the sunroof module. Ground for the sunroof module is supplied from G302.
The sunroof can be placed in 3 preset positions:
• Open
• Vent
• Closed
When the sunroof switch is placed in the OPEN position, a ground is applied from the sunroof switch low reference circuit , through the sunroof switch and to the sunroof switch open signal circuit. The sunroof motor/actuator then applies voltage to the sunroof motor open control circuit and applies a ground to the sunroof motor close circuit. The sunroof motor then opens the sunroof to the full open position.
When the sunroof switch is placed in the VENT position, a ground is applied from the sunroof switch low reference circuit , through the sunroof switch and to the sunroof switch open signal circuit. The sunroof module then applies voltage to the sunroof motor open control circuit and applies a ground to the sunroof motor close circuit. The sunroof motor then opens the sunroof to the VENT position.
When the sunroof switch is placed and held in the CLOSED position, a ground is applied from the sunroof switch low reference circuit , through the sunroof switch and to the sunroof switch close signal circuit. The sunroof module then applies voltage to the sunroof motor close control circuit and applies a ground to the sunroof motor open circuit. The sunroof motor then closes the sunroof.
The sunroof can be placed in any preferred open position when:
• The sunroof is in the fully opened position by pressing and holding the sunroof switch in the CLOSE position until the panel has reached the desired position then release the CLOSE switch in order to stop the sunroof
• The sunroof is opening, it can be stopped by momentarily pressing either side of the switch.
The sunroof control module, sun roof actuator, and the sunroof motor are integral parts of the sunroof module assembly and are not service separately.
Your best bet , take it to a qualified repair shop or buick dealer .
An what would you like to know ? How to fix it , how to close it ? There are complex electronics involved , An if you are not familiar with these thing's I suggest you take to a qualified repair shop ! It should still be under warranty !
BATT MAIN 2 Fuse 50 A
×