Most likely a head plug has corroded through if you cant find a hose leak. get it pressure tested by mech
SOURCE: repair/replace water pump on 97 chevy s-10
you will need to replace the water pump itself and its pretty easy to do. take of the top half of the fan shroud, pop off the hoses to the water pump and the take out the bolts to the water pump
SOURCE: I have a water leak from backside of engine
it sounds as if its a freeze plug or a heater hose give these websites a try www.autozone.com and www.alldatadiy.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.
SOURCE: 99 camry 2.2 l engine valve cover gasket leaking
There is a proper tightening sequence for the valve cover bolts. I've
found it extremely helpful to put a bead of RTV on the valve cover
gasket to help ensure a solid seal. I've had problems with the aluminum
threads in the head stripping out before reaching torque spec. You can use longer bolts in some of the holes on the head if you have stripping problems.
You should also wait 12 hours before starting the car, as you want the seal to take.
SOURCE: coolant leak. Backside of engine underneath
may have a bad freeze plug in the block or blown head gasket..
57 views
Usually answered in minutes!
×