At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
My audio and clock display stopped working all of a sudden. The audio system still worked fine. I had all my fuses checked previously and was told it could cost up to $800 to fix by Mazda. I pulled out fuse 31 and wiped it clean, reinserted it and now my display works as good as new. Thanks to those on this site for your help.
For general awareness, the outside air temperature sensor is located above the inside mirror. Try to reset the temperature measurement unit:1. Switch engine on.2. Press and hold clock minute (min) and hour (h) buttons simultaneoutly longer than 3 seconds. The display will show new temperature measurement unit.
hi mate if you keep blowing fuses disconnect your front fog lights and try again if your dash lights work then a bulb has failed and gone to earth if it still blows the fuse disconnect the dahs pod (clocks) and reconect the fog lights if it does not blow the fuse the it probably is the dash pod or something associated with the pod hope it helps
Raincity here, I discovered I was checking the wrong fuse. Got it working, fuse blown. The fuse is under the dash behind the little pocked to the left of the steering wheel. Good luck.
Take out the pc board and examine the copper traces. On my '94 Jetta I found one corroded trace that disabled the the same functions. I had to solder a wire to fix the connection. Good luck.
×