At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Amazon.cahttps://www.amazon.ca > Exterior-Replacement-CITR...
1.Remove all existing mirror glass from the mirror assembly plastic backing plate. 2.Clean the backing plate with rubbing alcohol and clean the back of the new ...
$70.50 · In stock
Results 1 - 40 of 914 - Help and advice on everything CITROEN XSARA PICASSO. ...fitted.. citroen do two variants.. one with pads and one with shoes. ... Hi when I turn side lights on my indicators start flashing and ... Both bulbs are OK, but light is of. ...our 2006 Picasso just wondering does yours go past 50mph if not then it ...Missing: arrows
One more thing the clutch is nearly gone but this wouldnt cause the noise. ... My horn keeps going off randomly in my Citroen C1 hatchback car ( 2006 ) when I ..... MyCitroen Xsara Picasso`s air bag warning light comes on but not all of the time. .....box Citroen C3 - two boxes will show, both fit, choose the £48.9 one + £5.00 ...
Could be a multitude of problems.
suspension drop links
anti roll bar bushes
ball joint
suspension mount
gearbox mounting
exhaust loose
wheel bearing
suspension strut
drive shaft
Best to get a mechanic check it to determine the problem as it could be any of the above.
lift car on the passenger side LHD or drivers side RHD then remove the plastic covers to expose the front of the engine ,then look for the idler tensioner right side of crank pulley ,now this is a left handed thread on the centre nut and turn it clockwise use a 15mm ring spanner and hook another spanner onto the end of this and turn and the idler tensioner will spring back .watch your knuckles ?
×