SOURCE: OBD code 0401 (1997 Toyota Camry 4 cyl)
There is a VSV (vacuum switching valve) , usually mounted on the back side of engine block, under the intake manifold, as well as the map sensor, that can also cause that code if one or the other is faulty. It takes some pretty detailed troubleshooting to confirm this in some cases, so if that's not in your line of work, you may have to have it properly diagnosed, or take a 50/50 shot at which one first.
SOURCE: Toyota camry 2004 dashboard lights switch
First turn on the parking switch & then turn the illumination light knod clockwise located in the dashboard.
SOURCE: How to replace 1997 Toyota Camry dashboard lights?
Not a quick job. You need to remove the instrument panel. once removed the bulbs simple twice a quater turn and you can replace them. removing the instrument panel varies on different cars, often you can do it without removing the steering wheel. You would normally take off the plastic under the steering wheel. lower the steering wheel as far as it will go. there should then be screws holding in the plastic around the instrument panel.
SOURCE: 97 toyota camry brake light is on in my dashboard
Check the brake fluid level and top off to full mark if it still stays on then you have a brake system failure in the hydrolic system front or rear brakes are not working and the light is telling you that.
93 views
Usually answered in minutes!
×