SOURCE: how do i change the low-beam bulb on my 2005 buick
there should be 2 brackets at the rear of bulb housing, 1 may have a small bolt.....lift these up and the headlamp housing should come out. you will see how it works when you get it apart.
SOURCE: Where is the power steering refill cap on a 2005
if its a 3.8, it is at the back of the motor on the passenger side, right up against the firewall about halfway down.
SOURCE: How to remove spark plugs. 2006 buick lacrosse
The front spark plugs should not be a problem. The rear are accessed with use of an "engine tilter". It can be purchased at many auto parts businesses, I purchased mine from NAPA. However, you may have to order one on-line as it is "an unknown item" as many of us are unaware that it even exists and I am sure that the mechanics and techs want to keep it that way. My cost in 2009 was in the $35 to $80 range for the tilter. It may sound a little scarry using it because you loosen the upper (literally right up on top where they are most easily accessed) mounts, but it is easy. I found that no electrical, air flow from filter, exhaust, etc., had to be loosened or removed. You only remove one side and install the tilter. Next you adjust the "tilter" to remove tension on the other bolt. Finally, simply screw the adjuster toward the front of car until you either have enough room to access the rear plugs or until you run out of bolt threads at which point you have as much room to do the job as any tech/mechanic. As usual, remove the old plugs (I only do one at a time which also eliminates crossing plug wires) and screw the new ones in several turns by hand to make sure that there is no cross threading. Once you are satisfied with your level of maintenance, simply adjust the "tilter" back to a point where the loose motor mount accepts the bolt to front frame, tighten it, remove the "tilter" and reinstall the second bolt. It really is that easy, but you will want to protect your paint with a proper cover as you do have to lean heavily against the fender or fenders. Oh, by the way, many mechanics skip the difficult-to-access plugs, knowing that when they, or it fails, you will be back. Enjoy, you will feel like a real pro, knowing that your job was done correctly and is complete!!!
SOURCE: how do you change spark plugs in a 2002 buick rendezvous cxl
When you change spark plugs make sure your engine is cold, if the engine is hot you have a chance of breaking the ceramic the plug is covered with. Go to your auto parts store and buy some spark plugs. Ask the auto parts clerk what the plugs need to be gapped at or you can have them do it. When ready to change plugs, again make sure engine is cold. You will need a ratchet, possibly an extention and a spark plug socket. Pull the spark plug wires from their hole each individually as to keep track of which wires go to what hole. Put your ratchet, socket and spark plug socket together and insert in hole. Turn the ratchet left as the saying goes righty tighty, lefty loosy. Pull plug from hole when all the way loose, put new plug in and tighten snugly and put wire on new plug. Repeat all these steps on other plugs.
SOURCE: The Cooling fan continues to run on my 2010 Buick
believe thats a new safety measure-cause engine increases in heat when stoppd--todays tech is so complex and each car has diff features----if no running issues ur probly ok
1,357 views
Usually answered in minutes!
×