SOURCE: 1998 dodge 1500 wont shift
first of all standard or auto i am guessing its standed standard under drivers side hood near master cylinder there is a small clutch reservoir if there isnt enough fluid it wont extend the throw out bearing far enough for a shift because the clutch pedal is hitting the floor not enough fluid to extend the slave cylinder to drive the fork second faulty slave cylinder or throw out bearing as far as the light blown dash bulb or somone snipped the wire or took the bulb out
SOURCE: transmission does not always shift into overdrive
Governor pressure sensor or solenoid is going bad. To replace them drop the tranny pan, remove the filter , and the parts are pretty ez to get to. These aren't cheep thou, but replace them as a set. Parts will probly run about $200.
SOURCE: Where is the reverse light switch on a 1999 Dodge Ram 1500 with automatic transmission located?
Look on the gearshift lever. You will have remove the cover to get to it.
SOURCE: My transmission is not shifing right
With truck running check transmission fluid level add if low
1,103 views
Usually answered in minutes!
×